Retsch AS 300 Manuale Utente Scaricare il pdf (Pagina 13)

07/02/2012 Retsch GmbH 13

Intermittent – continuous operation

7 8 9 10 11

When the AS300 control is switched on, intermittent operation is ini-

tially disabled.

Enabling intermittent mode of 10-99 sec. :

Press key 10

The LED above key 10 illuminates

Display 8 shows 10 sec.

Pressing key 9 raises the interval period up to 99 sec.

If 99 sec is overshot, start again with 10 sec.

Key 7 reduces the interval period down to 10 sec.

If 10 sec. is undershot, start again with 99 sec.

Disabling intermittent mode :

Press key 11

The LED above key 11 illuminates

Display 8 is extinguished

Memory – saving and calling-up sieve parameters

2 5 8 10 11 13

The memory function, thus saving or calling-up preselected sieve pa-

rameters, is only available in standby mode. You are able to change

and overwrite program places P1 to P9 at any time.

After the AS300 control has been turned on, display 2 shows "on".

The next program place P1 to P9 is reached by pressing the PROG

key. on reappears in the display after program place P9.

on = the sieve parameters 5/8/10-11 and 13 can be freely

set here.

P1 to P9 = sieve parameters can be stored and called-up here

Start = sieving process is started with the sieve parameters

stored in program place P1 to P9.

Occupying storage space

Press the PROG key until the required storage place P1-P9

has been reached.

Press the SET key, all displays flash

Set sieve parameter 5/8/10-11/13

The programming mode can be aborted by pressing the PROG button

– the values are not stored.

Press SET button – the values are stored

Flashing of the display stops, the adjusting interlock is activated, the

sieving parameters are stored.

If the AS300 control is actuated with a PC and the "EasySieve

sieve software, display 2 shows "ES". No manual changes to the sieve

parameters are possible in this mode.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Commenti su questo manuale

Nessun commento

Retsch AS 300 Manuale Utente Pagina 13

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Retsch AS 300